Description
Product Overview
The AFP-5A/10A/15A/20A is compact, cost-effective, 5/10/15/20-amp remote power supply with a battery charger built in. It may be connected to any 24-volt Fire Alarm Control Panel (FACP) or may stand alone. It is specifically designed to interface between the FACP and indicating devices to supply the additional power needed for a Fire Alarm System. For both retrofit and new installations, the model AFP-5A/10A/15A/20A Power Supply will save time and expense, while efficiently providing the continuous power needed to drive additional horns, strobes and bells. It comes complete with enclosure and ample room for two 12VDC 4/7/12/18Ah standby batteries.
Characteristics
- Filtered and electronically regulated outputs
- Short circuit and overload protection, high reliability with PPTC resettable fuse
- Built-in charger for sealed lead acid or gel type battery backup
- AC mains power and battery supervision and management with 32bit micro-processor
- Automatic instantaneous switchover to battery when AC fails, maintaining power to all attached devices without intervention.
- Sound alarm when mains power or battery fault with mute key
- Five status indicators for mains power work, battery work, mains power fault, battery fault and battery charging.
- Digital meter display the voltage and current
- Quick and easy installation, wiring and diagnosis
Specifications
Input: 90~264VAC, 45~60Hz, 1A fused
Output: 28VDC, 5A/10A/15A/20A, 150W/300W/450W/600W, 5A/10A/15A/20A resettable fused
Battery: 4Ah/7Ah/12Ah/18Ah sealed lead acid or gel type
Maximum charge current: 1A, resettable fused
Wire size: minimum 16 AWG/1.5 mm² (5A), 13AWG/2.5 mm²(10A), 11AWG/4 mm²(15A/20A), with
600V insulation
Operating Temperature: -20°C~+55°C Related Humidity: 20%~95%
Dimensions: 370×290×125mm Weight: 3 KGS IP Rating: IP54
Standard Specifications: BS EN54-4, UL 1481 and NFPA 72
Product Agents
C.M. Fire Equipment Limited
