Product Overview
The AFP-3A is compact, cost-effective, 3-amp remote power supply with a battery charger built in. It may be connected to any 24-volt Fire Alarm Control Panel (FACP) or may stand alone. It is specifically designed to interface between the FACP and indicating devices to supply the additional power needed for a Fire Alarm System. For both retrofit and new installations, the model AFP-3A Power Supply will save time and expense, while efficiently providing the continuous power needed to drive additional horns, strobes and bells. It comes complete with enclosure and ample room for two 12VDC 2.3Ah standby batteries.
Characteristics
- Filtered and electronically regulated outputs
- Short circuit and overload protection, high reliability with PPTC resettable fuse
- Built-in charger for sealed lead acid or gel type battery backup
- AC mains power and battery supervision and management
- Automatic instantaneous switchover to battery when AC fails, maintaining power to all attached devices without intervention.
- Sound alarm when mains power or battery fault with mute key
- Four status indicators for AC mains power presence, Battery presence, Low battery and Mute
- Quick and easy installation, wiring and diagnosis
Specifications
Input: 90~264VAC, 45~60Hz, 1A fused
Output: 28VDC, 3A, 90W Max., 3A resettable fused
Battery: 1.5AH, 2.2AH or 4AH sealed lead acid or gel type
Maximum charge current: 1A, float charge, 1A resettable fused
Wire size: minimum 17 AWG (1.0 mm²) with 600V insulation
Operating Temperature: -20°C~+55°C Related Humidity: 20%~95%
Dimensions: 230×162×82mm Weight: 1.6 KGS IP Rating: IP54
Standard Specifications: UL 1481 and NFPA 72
Product Overview
The AFP-5A/10A/15A/20A is compact, cost-effective, 5/10/15/20-amp remote power supply with a battery charger built in. It may be connected to any 24-volt Fire Alarm Control Panel (FACP) or may stand alone. It is specifically designed to interface between the FACP and indicating devices to supply the additional power needed for a Fire Alarm System. For both retrofit and new installations, the model AFP-5A/10A/15A/20A Power Supply will save time and expense, while efficiently providing the continuous power needed to drive additional horns, strobes and bells. It comes complete with enclosure and ample room for two 12VDC 4/7/12/18Ah standby batteries.
Characteristics
- Filtered and electronically regulated outputs
- Short circuit and overload protection, high reliability with PPTC resettable fuse
- Built-in charger for sealed lead acid or gel type battery backup
- AC mains power and battery supervision and management with 32bit micro-processor
- Automatic instantaneous switchover to battery when AC fails, maintaining power to all attached devices without intervention.
- Sound alarm when mains power or battery fault with mute key
- Five status indicators for mains power work, battery work, mains power fault, battery fault and battery charging.
- Digital meter display the voltage and current
- Quick and easy installation, wiring and diagnosis
Specifications
Input: 90~264VAC, 45~60Hz, 1A fused
Output: 28VDC, 5A/10A/15A/20A, 150W/300W/450W/600W, 5A/10A/15A/20A resettable fused
Battery: 4Ah/7Ah/12Ah/18Ah sealed lead acid or gel type
Maximum charge current: 1A, resettable fused
Wire size: minimum 16 AWG/1.5 mm² (5A), 13AWG/2.5 mm²(10A), 11AWG/4 mm²(15A/20A), with
600V insulation
Operating Temperature: -20°C~+55°C Related Humidity: 20%~95%
Dimensions: 370×290×125mm Weight: 3 KGS IP Rating: IP54
Standard Specifications: BS EN54-4, UL 1481 and NFPA 72
Product Agents
C.M. Fire Equipment Limited
Product Overview
The AFP-10A/20A is compact, cost-effective, 10/20-amp remote power supply with a battery
charger built in. It may be connected to any 24-volt Fire Alarm Control Panel (FACP) or may stand alone. It is specifically designed to interface between the FACP and indicating devices to supply the additional power needed for a Fire Alarm System. For both retrofit and new installations, the model AFP-10A/20A Power Supply will save time and expense, while efficiently providing the continuous power needed to drive additional horns, strobes and bells. It comes complete with enclosure and ample room for two 12VDC 7/12/18Ah standby batteries.
Characteristics
- Filtered and electronically regulated outputs
- Short circuit and overload protection, high reliability with PPTC resettable fuse
- Built-in charger for sealed lead acid or gel type battery backup
- AC mains power and battery supervision and management with 32bit micro-processor
- Automatic instantaneous switchover to battery when AC fails, maintaining power to all
attached devices without intervention.
- Sound alarm when mains power or battery fault with mute key
- Five status indicators for mains power work, battery work, mains power fault, battery fault and battery charging.
- Digital meter display the voltage and current
- Quick and easy installation, wiring and diagnosis
Specifications
Input: 90~264VAC, 45~60Hz, 1A fused
Output: 28VDC, 300W(10A) / 600W(20A), 10A/20A resettable fused
Battery: 7Ah/12Ah/18Ah sealed lead acid or gel type
Maximum charge current: 1A, resettable fused
Wire size: minimum 13AWG/2.5 mm²(10A), 11AWG/4 mm²(20A), with 600V insulation
Operating Temperature: -20°C~+55°C
Related Humidity: 20%~95%
Dimensions: 400 × 450 × 140mm
Weight: 6 KGS
IP Rating: IP54
Standard Specifications: BS EN54-4, UL 1481 and NFPA 72
Product Overview
The AFP-10A/20A is compact, cost-effective, 10/20-amp remote power supply with a battery
charger built in. It may be connected to any 24-volt Fire Alarm Control Panel (FACP) or may stand alone. It is specifically designed to interface between the FACP and indicating devices to supply the additional power needed for a Fire Alarm System. For both retrofit and new installations, the model AFP-10A/20A Power Supply will save time and expense, while efficiently providing the continuous power needed to drive additional horns, strobes and bells. It comes complete with enclosure and ample room for two 12VDC 7/12/18Ah standby batteries.
Characteristics
- Filtered and electronically regulated outputs
- Short circuit and overload protection, high reliability with PPTC resettable fuse
- Built-in charger for sealed lead acid or gel type battery backup
- AC mains power and battery supervision and management with 32bit micro-processor
- Automatic instantaneous switchover to battery when AC fails, maintaining power to all
attached devices without intervention.
- Sound alarm when mains power or battery fault with mute key
- Five status indicators for mains power work, battery work, mains power fault, battery fault and battery charging.
- Digital meter display the voltage and current
- Quick and easy installation, wiring and diagnosis
Specifications
Input: 90~264VAC, 45~60Hz, 1A fused
Output: 28VDC, 300W(10A) / 600W(20A), 10A/20A resettable fused
Battery: 7Ah/12Ah/18Ah sealed lead acid or gel type
Maximum charge current: 1A, resettable fused
Wire size: minimum 13AWG/2.5 mm²(10A), 11AWG/4 mm²(20A), with 600V insulation
Operating Temperature: -20°C~+55°C
Related Humidity: 20%~95%
Dimensions: 400 × 450 × 140mm
Weight: 6 KGS
IP Rating: IP54
Standard Specifications: BS EN54-4, UL 1481 and NFPA 72
Product Overview
AGB01 and AGB02 Fire Strobe Light utilizes super bright LEDs which generates a high-intensity light, visible from all sides of the lens to provide a visible notification signal for the purpose of life safety and property protection and it can connect synchronizer, thereby synchronizing with other bands of visual fire alarm. It is ideal to be installed at hotels, apartments, hospitals, commercial buildings, residential buildings, shopping malls or wherever visible alarms are required.
Having considered power saving for the fire alarm system, we adopted the best quality LEDs, which consume less current while maintaining the brightness comparable to the traditional Xenon strobe does. Besides, customers can also save on material costs by slashing the battery and the battery charger size. For facilitating the wiring work, our strobes can achieve self synchronization through power cables and no additional signal cables or equipment are required.
| Model |
AGB01/AGB02 |
| Description |
LED visual fire alarm |
| Voltage (with limit+/-15%) |
DC18V~DC28V |
| Light Output in candela |
120 cd/㎡ |
| Light Output in Colour |
White |
| Lens Colour |
White / Transparent |
| Current Draw |
31mA / 0.754W |
| Peak Current Draw |
35mA |
| Flash Frequency |
60 pulses/minute,1 Hz |
| Synchronized function |
In-built circuitry self-synchronized |
| Connection/device to achieve Synchronization |
No Module / synchronizer / control cable required |
| Operating Temperature |
-10℃~65℃ |
| IP Rating-*IP65 models labeled with ( wp ) Following the standard model number |
Standard weatherproof to BS5490 IP54/55,Special Request for *IP65(additional weatherproof lens fitted ring and in sealed type) |
| Dimensions |
AGB01:126 x 85 x 55 mm (L x W x H)
AGB02:140 x 130 x 60mm(L x W x H) |
| Standard Specifications CCIC test certificate |
Clause 9.7 of BS5839 Part 1:1988,EN54-23:2010, HKFSD circular 4/2001 point 3.(ii)and 4.(i)(ii)(iv) |
| Installation |
Wall or ceiling mounted |
| Brand Name |
ATM |
| Product Origin |
China–Hong Kong |
Product Agents
C.M. Fire Equipment Limited
Product Overview
AGB02 Fire Strobe Light utilizes super bright LEDs which generates a high-intensity light, visible
from all sides of the lens to provide a visible notification signal for the purpose of life safety and
property protection. It is ideal to be installed at hotels, apartments, hospitals, commercial
buildings, residential buildings, shopping malls or wherever visible alarms are required.
Having considered power saving for the fire alarm system, we adopted the best quality LEDs, which consume less current while maintaining the brightness comparable to the traditional Xenon strobe does. Besides, customers can also save on material costs by slashing the battery and the battery charger size. For facilitating the wiring work, our strobes can achieve self synchronization through power cables and no additional signal cables or equipment are required.
Characteristics
-
- SMT production technology, firmly, high reliability and anti-jamming
- Lower power consumption with super bright LEDs and more devices per loop
- Easy installation and wiring: plug-in to back box
- Built-in self-Sync circuit module
- Selectable flash frequency: 1, 1.5, 2, 2.5 Hz
- Universal mounting plate for both wall and ceiling applications
- Comply with BS5839 and the requirements stated in HKFSD circular 4/2001
Specifications
Operating Voltage: DC18V~DC28V
Power Consumption: 35mA 1.5W Max.
Brightness: 120 cd/m2 , IP Rating: IP54
Flash Frequency: 1-2.5 Hz self-Synchronized
Operating Temperature: -10°C~65°C
Standard Specifications: Clause 9.7 of BS5839,
EN54-23: 2010, HKFSD circular 4/2001, UL1638
Sales and Service
Automation Technology (HK) Limited
Room 603, 6/F, Chevalier Commercial Centre, 8 Wang Hoi Road, Kowloon Bay, Kowloon, Hong Kong
Product Overview
AGB08 Fire Strobe Light utilizes super bright LEDs which generates a high-intensity light, visible from all sides of the lens to provide a visible notification signal for the purpose of life safety and property protection and it can connect synchronizer, thereby synchronizing with other bands of visual fire alarm. It is ideal to be installed at hotels, apartments, hospitals, commercial buildings, residential buildings, shopping malls or wherever visible alarms are required.
Having considered power saving for the fire alarm system, we adopted the best quality LEDs, which consume less current while maintaining the brightness comparable to the traditional Xenon strobe does. Besides, customers can also save on material costs by slashing the battery and the battery charger size. For facilitating the wiring work, our strobes can achieve self synchronization through power cables and no additional signal cables or equipment are required.
| Model |
AGB08 |
| Description |
LED visual fire alarm |
| Voltage (with limit+/-15%) |
DC18V~DC28V |
| Light Output in candela |
120 cd/㎡ |
| Light Output in Colour |
Red |
| Lens Colour |
Transparent |
| Current Draw |
31mA / 0.754W |
| Peak Current Draw |
35mA |
| Flash Frequency |
60 pulses/minute,1 Hz |
| Synchronized function |
In-built circuitry self-synchronized |
| Connection/device to achieve Synchronization |
No Module / synchronizer / control cable required |
| Operating Temperature |
-10℃~65℃ |
| IP Rating-*IP65 models labeled with ( wp ) Following the standard model number |
Standard weatherproof to BS5490 IP54/55,Special Request for *IP65(additional weatherproof lens fitted ring and in sealed type) |
| Dimensions |
85 x 85 x 50mm (L x W x H) |
| Standard Specifications CCIC test certificate |
Clause 9.7 of BS5839 Part 1:1988,EN54-23:2010, HKFSD circular 4/2001 point 3.(ii)and 4.(i)(ii)(iv) |
| Installation |
Wall or ceiling mounted |
| Brand Name |
ATM |
| Product Origin |
China–Hong Kong |
Product Agents
C.M. Fire Equipment Limited
